GST Rate for HSN 7226
Specific items under 7226
| HSN Code | Description | GST Rate |
|---|---|---|
| 722611 | GRAIN-ORIENTED | 18% |
| 722619 | Other | 18% |
| 722620 | OF HIGH SPEED STEEL : | 18% |
| 722691 | NOT FURTHER WORKED THAN HOT-ROLLED : | 18% |
| 722692 | NOT FURTHER WORKED THAN COLD-ROLLED (COLD REDUCED) : | 18% |
| 722699 | Other : | 18% |
| 72261100 | GRAIN-ORIENTED | 18% |
| 72261910 | HOT ROLLED | 18% |
| 72261920 | COLD ROLLED | 18% |
| 72261990 | OTHER | 18% |
| 72262011 | IN COILS | 18% |
| 72262012 | OTHER | 18% |
| 72262021 | IN COILS | 18% |
| 72262022 | OTHER | 18% |
| 72262030 | HOOPS AND STRIPS | 18% |
| 72269110 | OF A THICKNESS OF BELOW 3 MM | 18% |
| 72269120 | OF A THICKNESS OF 3 MM AND ABOVE BUT NOT EXCEEDING 4.75 MM | 18% |
| 72269130 | HIGH TENSILE QUALITY OF A THICKNESS OF ABOVE 4.75 MM | 18% |
| 72269190 | OTHER | 18% |
| 72269210 | OF A THICKNESS OF BELOW 3 MM | 18% |
| 72269220 | OF A THICKNESS OF 3 MM AND ABOVE BUT NOT EXCEEDING 4.75 MM | 18% |
| 72269230 | OF A THICKNESS OF ABOVE 4.75 MM | 18% |
| 72269300 | FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM - OTHER: ELECTROLYTICALLY PLATED OR COATED WITH ZINC | 18% |
| 72269400 | FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM - OTHER: OTHERWISE PLATED OR COATED WITH ZINC | 18% |
| 72269910 | OF A THICKNESS OF ABOVE 4.75 MM | 18% |
| 72269920 | OF A THICKNESS OF ABOVE 3 MM AND BUT NOT EXCEEDING 4.75 MM | 18% |
| 72269930 | OF A THICKNESS OF BELOW 3 MM | 18% |
| 72269940 | SKELP (STRIPS FOR PIPES AND TUBES) | 18% |
| 72269951 | HOT ROLLED | 18% |
| 72269952 | COLD ROLLED | 18% |
| 72269953 | OF SPRING STEEL, OTHER THAN SKELP | 18% |
| 72269960 | SKELPS AND STRIPS FOR RAZOR BLADES AND SAW BLADES | 18% |
| 72269971 | PLAIN AND CORRUGATED | 18% |
| 72269972 | electrolytically, plain and corrugated | 18% |
| 72269973 | GALVANNEALED | 18% |
| 72269979 | OTHER | 18% |
| 72269981 | with aluminium | 18% |
| 72269982 | with aluminium-zinc alloys | 18% |
| 72269983 | painted, coloured or coated with plastics | 18% |
| 72269989 | Other | 18% |
| 72269990 | OTHER | 18% |
Tax calculator for HSN 7226
Enter a taxable value to calculate GST. You can use this for a quick invoice estimate.
Invoice example (₹1,000 taxable value)
Compliance pointers (ITC / RCM / classification)
Input Tax Credit depends on usage conditions, restrictions, and supplier eligibility. Treat this as a quick hint — verify for edge cases.
Reverse Charge is notification-based and can depend on supplier status and transaction type. If you see a warning, double-check notifications and your invoice terms.
- •Compare adjacent headings within Chapter 72 before finalizing.
- •Use chapter notes to avoid common confusions (materials vs finished goods, kits, etc.).
- •For services (99), place-of-supply can change whether IGST/CGST+SGST applies.
FAQs for HSN 7226
What is the GST rate for HSN 7226?▾
GST rate for HSN 7226 is 18%. Always verify the latest CBIC/GST notifications for changes.
Is HSN mandatory on invoices?▾
HSN is generally required on B2B invoices; the number of digits depends on turnover and the nature of supply. Exports/imports typically use more detailed codes.
How do I use this code on an invoice?▾
Add HSN 7226 in the line item and apply GST @ 18%. For intra-state supplies: 9% CGST + 9% SGST. For inter-state supplies: 18% IGST.
Does ITC apply for this HSN?▾
ITC depends on conditions and restrictions under GST law, plus the nature of usage and supplier eligibility. Use the ITC badge as a hint and verify with your CA for edge cases.
Can Reverse Charge (RCM) apply here?▾
RCM is notification-based and depends on the supply category, supplier status, and transaction type. If you see an RCM note, treat it as a “verify” signal.
What if I pick the wrong HSN?▾
Wrong classification can cause rate mismatch, notices, interest/penalty exposure, and reconciliation issues. Compare nearby headings and chapter notes before finalizing.
Sources & accuracy
General GST guidance, return filing references, and updates.
Rates, exemptions, and clarifications may change via notifications/circulars.
Use chapter notes/headings to avoid misclassification.
How we update pages + what “Last reviewed” means. Last reviewed: 22 Jan 2026.
Next steps after choosing HSN 7226
Use global search to compare descriptions and avoid wrong classification.
Check inclusions/exclusions and common confusions for Chapter 72.
Decide whether IGST or CGST+SGST applies based on POS rules.
Related tools & next actions
Common next actions: verify POS (tax type), check RCM risk, or compare similar HSN codes.